G2000 opening tool (slow, but housing could possibly be reused (not for swap); please check hooks on the housing carefully after opening).
The location of the hooks compared to Classic is different (especially belt clip hook) Picture 1
Insert opening tool G2000 in the above described position between both hooks (red rectangles). After inserting push the tip of the tool downwards (red arrow) and press the other end down (green arrow) in order to lift the upper case shell. If necessary insert a second opening tool G2000 in the hook area (red rectangles) and try so to lift the upper case shell. Do the same on the opposite side of the handset. Picture 2
Insert the tool in the above described position and try to disengage the belt clip hook. Do the same on the opposite side of the handset. Picture 3
Insert battery dummy G3000 in battery compartment. Pull the board evenly in order to get upper and lower spring at the same time out of the battery compartment Picture 4
Attachment:
4000_Comfort_3.JPG (19 kByte, 605 x 323 pixels)
save
4000_Comfort_2.JPG (25 kByte, 675 x 331 pixels)
Picture optimized für best viewing. Large view - save
4000_Comfort_1.JPG (27 kByte, 704 x 359 pixels)
Picture optimized für best viewing. Large view - save
4000_Comfort_4.JPG (13 kByte, 598 x 271 pixels)
save
|